BQQWY - ACRY-LUX LATEX HIGH-GLOSS ENAMEL ALL (SUPP
- MSDS: BQQWY
- Manufacturer: KELLY MOORE PAINT CO INC
- Product Name: ACRY-LUX LATEX HIGH-GLOSS ENAMEL ALL (SUPP
- National Stock Number: 8010-00N036373
Product Identification
Product ID:ACRY-LUX LATEX HIGH-GLOSS ENAMEL ALL (SUPP
MSDS Date:05/30/1986
FSC:8010
NIIN:00N036373
MSDS Number: BQQWY
Responsible Party
SAN CARLOS, CA 94070
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 415-592-8337
Preparer: JOE SCARRY
Cage: KELLY
Contractor
Telephone: 415-592-8337
Cage: KELLY
Ingredients
ETHANOL, 2(2-BUTOXYETHOXY)-; (DIETHYLENE GLYCOL MONOBUTYL
CAS: 112-34-5
RTECS: KJ9100000
Fraction By Weight: <5%
PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
CAS: 25265-77-4
RTECS: UF6000000
Fraction By Weight: <5%
0.05 @
CAS: 107-41-5
RTECS: SA0810000
Fraction By Weight: < 5%
OSHA PEL 25 PPM, C
ACGIH TLV: 25 PPM, C
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DIZZINESS, HEADACHE, NAUSEA,
CONFUSION, IRRITATION TO UPPER RESPIRATORY TRACT, UNCONSCIOUSNESS,
SKIN & EYE IRRITATION. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SEE YOUR PHYSICIAN FOR SPECIFIC
MEDICAL OPINION REGARDING YOUR CONDITION.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. RESTORE BREATHING. CONSULT
PHYSICIAN. EYE: FLUSH WITH LARGE VOLUMES OF WATER FOR AT LEAST 15
MIN. GET MEDICAL ATTENTION. SKIN: WIPE OFF WITH A RAG. WASH
THOROUGHLY WITH SOA P AND WATER. INGEST: CONSULT HOSPITAL EMERGENCY
ROOM OR POISON CONTROL CENTER IMMEDIATELY.
Fire Fighting
Flash Point:>200F,>93C
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO
BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:VENTILATE AREA TO PREVENT BUILD-UP OF VAPORS.
FOR SMALL SPILLS, SOAK UP WITH ABSORBENT. FOR LARGER SPILLS, DIKE
AREA WITH ABSORBENT MATERIAL AND SCOOP UP LIQUIDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE UPRIGHT IN SEALED CONTAINERS
AWAY FROM HEAT AND FLAME.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD PARTICLE MASK TO AVOID
BRTHG SPRAY MIST/SANDING DUST IF LOC VENT IS ADEQ TO KEEP WITHIN
ACCEPTABLE LIMITS. IF LOC VENT IS NOT ADEQ, THE USE OF A NIOSH/MSHA
APPRVD RESP FOR ORGANI C VAP, SUPPLIED AIR OR SCBA IS RECOM.
Ventilation:LOCAL EXHAUST SUFFICIENT TO KEEP TLV BELOW PRESCRIBED
LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:REMOVE AND WASH CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
MFR TRADE NAME/PART NO: COLORS, 1680-SERIES.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGS
Vapor Density:LTR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:62-72
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMPOSITION AS IN WELDING.
Disposal
Waste Disposal Methods:DISCARD IN LANDFILL IN SEALED METAL CONTAINERS
AWAY FROM HEAT AND FLAME AND IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.